Citizen Systems iDP-3535 user manual 30/38

iDP-3535 User’s Manual

For U-type only (USA type)

Your iDP3535 is equipped to drive up to 2 external device – Paper Winder and / or Cash Drawers.

The 4 pin molex connector and the first driver of the modular connector (pins 2 & 3) are shared by the same driver and only one device can be connected to this driver. Acceptable combinations of configurations are:

A)No external devices connected.

B)One Cash Drawer connected to 4-pin molex connector. Set DIPI-6 OFF.

C)One Paper Winder connected to 4-pin molex connector. Set DIPI-6 ON.

D)One Cash Drawer connected to Modular Connector Drive 1 [pins 2 & 3]. Set DIPI-6 OFF. (Note that the 4-pin molex connector cannot be used.)

E)Two Cash Drawers connected – Drawer 1 connected to 4-pin molex connector – Drawer 2 connected to Modular connector Drive 2 [pins 4 & 5]. Set DIPI-6 OFF. (Note that the Modular Connector Drive 1

[pins 2 & 3] can not be used.)

F)Two Cash Drawers connected – Drawer 1 connected to Modular connector Drive 1 [pins 2 & 3]. Drawer 2 connected to Modular connector Drive 2 [pins 4 & 5]. Set DIPI-6 OFF.

(Note that the 4-pin Molex Connector cannot be used.)

G)One Cash Drawer and One Paper Winder connected. Paper Winder connected to 4-pin molex connector Drawer 2 connected to Modular connected Drive 2 [pins 4 & 5]. Set DIPI-6 ON.

(Note that the Modular Connector Drive 1 [pins 2 & 3] cannot be used.)

CITIZEN 30/38