Note: If you need to install the TCP/IP Protocol, con- tact your system adminis- trator or ISP, or refer to the Windows 95 documenta- tion. If DHCP error mes- sages appear during boot up, this is a TCP/IP error. Linksys does not provide technical support for the configuration or trou- bleshooting of the TCP/IP protocol.
EtherFast® 10/100 LAN Cards
Network Component Configuration
1.Once you are back at the Windows 95 desktop, click on your taskbar's Start button, then Settings, then Control Panel, and then
2.The Network window will appear (next page). Click on the Configuration tab. A window similar to the one below will appear. There may be other components listed in addition to the ones shown below (for
example,
• Client for Microsoft Networks
• Linksys LNE100TX Fast Ethernet Adapter (LNE100TX v4)
•
• NetBEUI
• TCP/IP
19