EtherFast® 10/100 LAN Cards
13.Click Finish. When asked if you want to restart your computer, remove the Driver Disk and click Yes.
14.Once your PC has rebooted and you are logged in,
•If you had previously installed any NT service packs, you must go back and
•If you need to install the TCP/IP protocol, refer to your system adminis- trator or your Windows NT documentation. Linksys does not provide technical support for the configuration or troubleshooting of the TCP/IP protocol
The Windows NT Installation and Setup of the EtherFast 10/100 LAN Card is complete. Do not continue on with the next set of instructions. They are for NT users who already had their networking configured.
Note: If you had previously installed any NT service packs, you must
33