Boca Research 10/100 manual Manually Installing the Network Components in Windows 95

Note: You will likely need your Windows CD-ROM to install network

components. If your CD- ROM isn’t available, try directing Windows to “c:\win- dows\options\cabs” when asked for a file location.

Linksys EtherFast Series

Manually Installing the Network Components in Windows 95 & 98

There may be times when you might need to manually install missing Windows networking components.

1.Click on Start, Settings, then Control Panel.

2.Double-click the Network icon. The Network window appears.

3.Click on the Configuration tab. Make sure that the following network components are installed.

•Client for Microsoft Networks

•Linksys LNE 100TX Fast Ethernet Adapter (LNE100TX v4)

•IPX/SPX-compatible Protocol

•NetBEUI

•TCP/IP

There may be other components listed in addition to the ones shown above. If any of the above com- ponents are missing, add them as follows.

Client for Microsoft Networks

If you plan on connecting to an NT file server or peer-to-peer network, click on the Add button. Highlight Client and click on Add. Choose Microsoft as the manufacturer in the Network

Client box. Highlight Client for Microsoft Networks and click OK. The com- puter will begin copying files to your system. When the installation is com- plete, you will be asked if you want to reboot. Click OK.

Client for NetWare Networks

If you plan on connecting to a Novell NetWare server (3.x), click on the Add button. Highlight Client and click on Add. In the Network Client window, select Manufacturer and choose Microsoft. Highlight Client for Microsoft Networks. Click OK. The computer will begin copying files to your system. When the installation is complete, you will be asked if you want to reboot. Click OK.

60