ATI Technologies 9700 Windows New Hardware Found, Installing the Catalyst Software Suite

14 Installing the Hardware and Software

Windows® New Hardware Found

Windows may start the Add New Hardware Wizard to install the Standard VGA Driver. To correctly install your new hardware:

If you are using Windows® 2000 or Windows® XP, Cancel the Wizard and proceed to Installing the CATALYST™ Software Suite on page 14.

•If the Add New Hardware Wizard does not appear, proceed to Installing the CATALYST™ Software Suite on page 14.

•If the Add New Hardware Wizard does appear:

1Click Next to allow Windows® to search for the Standard VGA or Standard PCI Graphics Adapter.

If prompted for the Windows® CD-ROM, insert it into your CD-ROM drive.

2Type the following: D:\operating system name (for example, D:\WinME).

If D is not your CD-ROM drive, substitute the correct drive letter.

3Click OK, click Finish to close the Wizard, then restart your computer.

Installing the CATALYST™ Software Suite

ATI’s CATALYST software suite provides the ultimate software required to enjoy the full power of your ALL-IN-WONDER card. The CATALYST software suite comprises four, distinct software elements:

•Display driver

•Multimedia Center

•HydraVision (not included in the Express Install)

•Remote Wonder Software

To ensure you install the latest software, use the ATI Installation CD-ROM that shipped with your ALL-IN-WONDER card.