ATI Technologies 9700 specifications Sound when, No sound on the videotape when outputting to a

	Reference 47
Problem	Possible Solution
No sound from Ensure that the audio connection between your
TV	ALL-IN-WONDER card and your sound card is correct.
	For instructions, see Input and Output Adapters on
	page 19.

Can’t record Check the record mixer settings:

sound 1 Click Start, point at Programs, point at Accessories, point at Entertainment, then select Volume Control. Or, right-click the speaker icon (usually in the lower- right corner of your screen), then click Open Volume Controls.

2In the Volume Control menu, click Options, click Properties, click Recording, then click OK. The Recording Control opens.

3Ensure that Line (or the Audio input you selected in the TV Sound Initialization Wizard — see page 23) is checked, then click to close the dialog.

Can’t record Connect the VCR audio output to your PC:

sound when

Left and right audio output from your VCR must be recording from connected to your ALL-IN-WONDER 9700 Series card a videotape

(note that S-Video does not provide an audio connection). For instructions, see Input and Output Adapters on page 19.

No sound on the videotape when outputting to a

VCR

Connect your PC audio to the VCR:

Left and right audio output from your VCR must be connected to your ALL-IN-WONDER 9700 Series card (note that S-Video does not provide an audio connection). For instructions, see Input and Output Adapters on page 19.