ATI Technologies 9700 specifications Selecting the sound card connector for TV audio input

Installing the Hardware and Software 23

Selecting the sound card connector for TV audio input

The sound card connector determines which mixer slider is controlled by the ATI Multimedia Center’s volume slider.

1 Click the Setup button in the TV Player control panel, then click the Display tab.

2Click the Initialization Wizard button, then click the Next button twice.

3In the Typical Audio Connections page, check I have connected the cable to confirm that you have connected your ALL-IN-WONDER card’s audio output cable to your sound card’s Line-In connector.

4Click Next to open the TV Sound Initialization Wizard.

5Click the audio input that matches the connection between your ALL-IN-WONDER card and your sound card. (Line- In is the standard audio input when the ALL-IN-WONDER card’s audio output cable is connected to the sound card’s Line-In connector.) If you are not sure how it is connected, click each source (CD Audio, Line-In, etc.), and listen for the sound.

6Click the Next button until you reach the End of Initialization Wizard page, then click the Finish button.

i

Ensure that the ALL-IN-WONDER card’s audio output cable is connected to your sound card’s Line-In connector.