IPS 1000 Series VoIP Gateway
Cut off the conductor outside the edge to avoid from causing the circuit shortage
8.Information required before Installation
You need to prepare the following information before installing the gateway.
8.1.IP Address
The gateway requires an IP address for operation. Before installation you need to know how to obtain an IP address from your local ISP. Static IP, DHCP or PPPoE can be used. The following table helps you to decide what information you need. If your ISP offers static IP, you may need to obtain an IP from MIS personnel in order to prevent an IP conflict. Otherwise DHCP (most cable broadband providers offer this) and PPPoE (most ADSL broadband providers offer this) will work fine.
IP Environment |
| Requiring information |
Static IP | Public IP | IP Address |
| Address | Subnet Mask |
|
| Default Gateway |
|
| It is strongly suggested that you obtain an |
|
| IP address from MIS personnel in order to |
|
| prevent an IP conflict. |
|
|
|
| Private IP | IP Address |
| Address | Subnet Mask |
|
| Default Gateway |
|
| It is strongly suggested that you obtain an |
|
| IP address from MIS personnel in order to |
|
| prevent IP conflicts. |
|
| Your private IP requires an IP Sharing |
|
| device and you must configure the IP |
|
| Sharing device to treat the IPS unit and the |
|
| IP that it is using as a virtual server. |
|
|
|
Dynamic IP address (DHCP) | DHCP mode | |
|
|
|
12