ArtDio IPS 1000 user manual Appendix a Phone-Set Command, Dnd

IPS 1000 Series VoIP Gateway

14.Appendix

14.1.Appendix A: Phone-Set Command

Pick up the handset and listen for the dialing tone. Dial “##0000 and listen for three consecutive tones before setting the following parameters. After input the parameters, please dial ‘# to end the configuration.

Command	Description	Parameters
01	IP State	0 : static; 1: DHCP; 2: PPPoE
02	IP Address	xxx*xxx*xxx*xxx
03	Subnet Mask	xxx*xxx*xxx*xxx
04	Default Gateway	xxx*xxx*xxx*xxx
05	Primary DNS Server	xxx*xxx*xxx*xxx
	IP
06	Second DNS Server	xxx*xxx*xxx*xxx
	IP
07	Select Signaling Port	0~65535
08	Select RTP Base Port	0~65534 (limit to even port number only)
09	PPPoE username	User name (use the mapping table to map
		character into digits)
10	PPPoE password	Password (use the mapping table to map
		character into digits)
11	DND	0 : Disable ; 1: Enable
12	SIP Forward State	0 : Disable ; 1: Enable; 2: Busy; 3: No Answer
13	SIP Forward Target	6 Digits
14	Change Service Port	1:FTP; 2:HTTP 3:Telnet (Port: 0-65535)
15	Change WEB	6 digits
	Password
16	Change FTP	6 digits
	Password
40	Listen for the IP	(ending ”#” is not required)
	Address
41	Listen for the Subnet	(ending ”#” is not required)

53