American Megatrends MAN-759 manual Drive Type How to Configure, Scsi

Standard Setup, Continued

Pri Master, Pri Slave, Sec Master, Sec Slave Select one of these hard disk drive icons to configure the hard disk drive named in the option. Select Auto from the drive parameters screen to let AMIBIOS automatically configure the drive. A screen with a list of drive parameters appears. Click on OK to configure the drive.

Drive Type	How to Configure
SCSI	Select Type. Select SCSI in the drive parameter screen. The
	SCSI drivers provided by the SCSI drive or SCSI host
	adapter manufacturer should allow you to configure the
	SCSI drive.
IDE	Select Type. Select Auto to let AMIBIOS determine the
	parameters. Click on OK when AMIBIOS displays the drive
	parameters.
	Select LBA/Large Mode. Select On if the drive has a
	capacity greater than 540 MB.
	Select Block Mode. Select On to allow block mode data
	transfers.
	Select 32-Bit Transfer. Select On to allow 32-bit data
	transfers.
	Select the PIO Mode. It is best to select Auto to allow
	AMIBIOS to determine the PIO mode. If you select a PIO
	mode that is not supported by the IDE drive, the drive will
	not work properly. If you are absolutely certain that you
	know the drive’s PIO mode, select PIO mode 0 - 5, as
	appropriate.
CD-ROM	Select Type. Select CDROM. Click on OK when AMIBIOS
	displays the drive parameters.
Standard	Select Type. You must know the drive parameters. Select
MFM Drive	the drive type that exactly matches your drive’s parameters.
Non-	Select Type. If the drive parameters do not match the drive
Standard	parameters listed for drive types 1 - 46, select User and
MFM Drive	enter the correct hard disk drive parameters.

Cont’d

Chapter 2 WINBIOS Setup 35