American Megatrends MAN-759 manual Peripheral Setup

Peripheral Setup

Peripheral Setup options are displayed by choosing the Peripheral Setup icon from the WINBIOS Setup main menu. All Peripheral Setup options are described in this section.

Onboard Floppy Controller Set this option to Enabled to enable the floppy drive controller on the motherboard. The settings are Enabled or Disabled. The Optimal default setting is Enabled. The Fail-Safe default setting is Disabled.

Onboard Primary/Secondary IDE This option specifies the IDE channel used by the onboard IDE controller. The settings are Disabled, Primary, Secondary, or Both. The Optimal and Fail-Safe default settings are Disabled.

Onboard IDE Bus Master Set this option to Enabled if the onboard IDE controller is a PCI bus mastering device. This option is not available if the Onboard Primary/Secondary IDE option is set to Disabled. The settings are Enabled or Disabled. The Optimal and Fail-Safe default settings are Enabled.

Onboard Primary Prefetch This option enables the prefetch feature for the specified IDE device attached to the onboard Primary IDE controller. The settings are Master, Slave, Both, or Disabled. The Optimal and Fail-Safe default settings are Disabled.

Onboard Secondary Prefetch This option enables the prefetch feature for the specified IDE device attached to the onboard Secondary IDE controller. The settings are Master, Slave, Both, or Disabled. The Optimal and Fail-Safe default settings are Disabled.

Cont’d

Chapter 2 WINBIOS Setup 57