Step 9 Attach Cables, Continued
J25 Keyboard Lock J25 is a 5-pin single-inline berg that is attached via a cable to the keyboard lock connector (or separate keyboard lock and Power LED connectors). The computer chassis may not include the keyboard lock and Power LED on a single connector. The keyboard lock allows the user to lock the keyboard, protecting the system from unauthorized use. Pin 1 on the motherboard is identified by the broad arrow.
| Pin | Description | |
| | | |
| 1 | VCC | |
| | | |
| 2 | Ground | |
| | | |
| 3 | Ground | |
| | | |
| 4 | Keyboard Lock (KBDINH) | |
| | | |
| 5 | Ground | |
| | | |
| | | |
J28 Turbo LED J28 is a 2-pin berg that is attached via a cable to the externally-mounted bipolar Turbo LED. The LED lights when the motherboard is running at high speed.
J31 IDE LED J31 is a two-pin berg that is attached via a cable to the externally-mounted IDE Activity LED. This LED lights when the IDE drive is running.
Warning
In some IDE drives, you may have to disable the IDE LED mounted on the drive by changing a jumper or setting a switch on the IDE drive itself, before the IDE drive sends a signal to J31.
Cont’d
18Pegasus PCI Motherboard User’s Guide