Channel Plus 5115PAL, 5115HHR warranty Programming a New Channel, Channel Spacing, Error Indication

Programming a New Channel

Valid channels are 14 thru 64 for UHF and 65 thru 125 for CATV Channels 95-99 are not available. Channels 21 thru 62 are for Pal.

Channel Spacing:

Skip at least one number between the new channel and the closest existing UHF/CATV channel.

(example 14 and 16: OK 14 and 15: Unacceptable)

Error Indication:

If an error occurs or an incorrect channel is entered, the LED will flash quickly for one second and return to previous settings.

Cable HRC and IRC considerations:

Most cable services use IRC frequency assignments. This is the default for the 5115. However, if the cable services uses HRC or the TV appears to search for the “created channel”, program the channel injector for HRC.

For HRC enter 98. Reset to IRC by entering 99.

Entries 98 and 99 are for setting HRC or IRC only. They will not change the channel number.

With programming complete, test each TV in the system to see that it is receiving the new channel.

Specifications: typical @ 25°C ± 5° C
	5115HHR / 5115BID	5115PAL(AUS)
video input format	NTSC	CCIR
input signal	1.0 V peak-to-peak @ 75Ω
output	12dBmV normal - 15.5dBmV maximum
input connectors	3 RCA (video + audio left + audio right)
loop-thru connectors	3 RCA (video + audio left + audio right)
video termination	75Ω or > 1 MΩ in “loop” position (selectable)
tuning range UHF	14 to 64	21 to 62(28 to 67)
CATV	65 to 125A
power supply	included with product
mains power	105 to 125	210 to 250
output of power supply	15VDC 600mA
general
width x height x depth	injector module	wall plate
	6.5” x 3.5” x 1.25”	1.25” x 4.0” x 1.75”
	(16.3cm x 9cm x 3.2cm)	(3.2 cm x 10.5cm x 4.0cm)
shipping weight	2 lbs (0.9 kg)
operating temperature	–4°F to 131°F (–20°C to 55°C)

Aexcluding channels 95 through 99

10 11