Channel Plus 5115BID Power Length Requirements, How to Program, To program For example channel

Power Length Requirements

Method One

Up to 300’ of Cat 5 or quad wire maximum

power plug

Power Length Requirements

Method Two

How to Program

Determine which unused channel you want to view your video source on and program the injector for that channel. There must be one unused channel both before and after the selected channel to avoid interference. The new channel will be combined with the exist- ing channels and appear on all televisions.

1999©	Upper right corner on
	channel injector
	green LED
	programming button

Up to 300’ of Cat 5 or quad wire maximum

Up to 100’ of Cat 5 or quad wire maximum

power plug

To program: For example channel 60

1:Press the button 6 times.

2:Wait for the LED to relight.

3:Press the button 10 more times (pressing 10 times enters “0”).

The injector will now combine the wall plate feed on channel 60 with all other existing channels from the incoming CATV or antenna.

To program a three digit channel: For example channel 120

Power Length Requirements

Method Three

Up to 100’ of Cat 5 or quad wire maximum

power plug

1:Press the button 1 time.

2:Wait for the LED to relight.

3:Press the button 2 more times.

4:Wait for the LED to relight.

5:Press the button 10 more times.

Finding Unused Channels

CATV: Determine the highest channel number delivering a picture, excluding 95-99. Tune the TV up one channel at a time from the last channel with a picture until finding one channel with no trace of a picture or interference, just snow.

Antenna: Tune the TV one channel at a time from channel 14-64. Locate one channel that has no trace of a picture or interference, just snow.

8 9