3Digital Effects Processor
Onboard your MultiMix USB2.0 is a powerful effects unit that has 100 preset programs. We offer a few tips on where to use these, but don’t limit yourself to our suggestions. We recommend that you experiment with these effects to get a good feel for how they can improve your mixes
Effects Section Components
Program Selection Knob
You can use this knob to assign one of 100 effect programs to
your mix. Turning the knob to the right increments the program
number, and turning it to the left decrements the program number.
You can control the level of the effect for each channel via the
channel’s AUX B knob. You must PRESS the effect knob to activate the selected effect.
LED Display
This display shows you the number of the current program.
CLIP Indicator
When lit, this LED tells you that there is a signal clip at the internal effects input. This means that you should reduce the signal via the EFFECTS / AUX RET B LEVEL control.
SIG Indicator
When lit, this LED indicates that the effects processor is receiving a signal.
Effect Descriptions
HALL
This type of reverb simulates the ambience of a grand concert hall.
ROOM
This type of reverb reproduces the more intimate ambiance of natural room acoustics.
PLATE
These are simulations of metal plate reverbs, as used on classic recordings from the '70s and '80s.
CHAMBER
These are simulations of the reverb created by artificial echo chambers, as used on classic recordings of the '50s and '60s.
19