Alesis USB2.0 manual Specifications, Input Channels

Page 51

8Specifications

For the more technical-minded, here are some detailed specifications for the MultiMix’s operating levels.

Input Channels

-60dBu to –10dBu nominal, +5dBu

Mic In Sensitivity Range:

Line In Sensitivity Range:

maximum

-40dBu to -+10dBu nominal,

Mic/Line Gain Range:

+25dBu maximum

+10 to +60dB

Equalization

75Hz, 18dB/octave

High-Pass Filter:

High Shelving:

12kHz,

+/- 15dB

Mid Bandpass/Band Reject:

2.5 kHz, +/- 15dB

Low Shelving:

80Hz,

+/- 15dB

Aux Sends

Aux Send A & B Gain Range: -∞ to +10dB

Aux Returns

-∞ to +15dB

Aux Return A Gain Range:

Effects Level/

-∞ to +15dB

Aux Return B Gain Range:

Channel Levels

-∞ to +10dB

Channel Level Gain Range:

Master Levels

 

Main Mix, Ctrl Room Gain

-∞ to +10dB

Range:

1/4” Inputs

+4dBu nominal, +20dBu maximum

Stereo Aux Return Level:

RCA Inputs

-10dBV nominal, +5dBV maximum

2-TRACK IN Level:

1/4” Outputs

 

Main Mix, Ctrl Room,

+4dBu nominal, +20dBu maximum

Ext Aux Send Level:

Headphone Output:

75 ohm output impedance

 

>105mW into 75 ohms, >40mW

 

into 600ohms

RCA Outputs

-10dBV nominal, +5dBV maximum

2-TRACK OUT Level:

Dimensions

14.5” x 10.75” x 5”

Width x Length x Height:

Weight:

(368mm x 273mm x 153mm)

7lbs

 

(3.2kg)

All measurements done over a 22Hz – 22kHz range with a 1kHz sine wave at +18dBu (-1dBFS) input. Impedances are measured at 1kHz.

49

Image 51
Contents Reference Manual Page Table Of Contents Table Of Contents Chapter Nine Block Diagrams Glossary Contact Chapter Eight SpecificationsThis page intentionally left blank Welcome IntroductionMultiMix USB2.0 Key Features About the MultiMix USB2.0All-In-One Mixer and Multichannel Computer Audio Interface Introduction How to Use This Manual Few Words for Beginners This page intentionally left blank Hooking up the MultiMix USB2.0 Getting StartedUsing Proper Cables Setting LevelsGetting Started Line Inputs Channels 1 Tour of the MultiMix USB2.0Patchbay Mic Inputs Channels 1Tour of the MultiMix USB2.0 Line Inputs Channels 5Phone Jack Aux Channel StripsLevel Control PAN or BALMain Mix 2TK to Ctrl Room SwitchMIX to Ctrl Room Switch Master SectionPower Indicator +48V IndicatorLED Meters Rear of the Mixer Digital Effects Processor Effects Section ComponentsEffect Descriptions Chorus Digital Effects ProcessorSimple Live Setup Using Additional External Audio SourcesTraditional Mixing Traditional Mixing Simple Two-Channel Recording Setup without using a computerUSB2.0 Recording First-time connection and driver installation instructionsInstalling the optional applications Power-on/Power off orderUSB2.0 Recording USB2.0 inputs and outputs Channels sent from the MultiMix to the computerChannels returned from the computer to the MultiMix Sound setup under Windows USB2.0 Recording Disabling Windows System Sounds Connections and settings for USB2.0 recording and monitoring Choosing the MultiMix as your audio device Choose the menu option Devices Device Setup…USB2.0 Recording USB2.0 Recording Creating a new audio file USB2.0 Recording USB2.0 Recording USB2.0 Recording Working with the Alesis USB2.0 control panel Accessing the control panelChoose the menu Options Audio… USB2.0 Recording USB2.0 Recording Assigning inputs to audio tracks Using the MultiMix USB2.0 with CoreAudio on the Macintosh Cause Troubleshooting HardwareEffects / AUX RET B Troubleshooting HardwareNo power This page intentionally left blank Audio playback or recording stutters or drops out Troubleshooting SoftwareBasic troubleshooting Audio playback or recording is at the wrong speedTroubleshooting Software Input Channels SpecificationsComputer Requirements SpecificationsBlock Diagrams Block Diagrams Term GlossaryGlossary Glossary Trademarks Alesis Contact Information