Component

Note：Volume control function will effect while connect with Vision Converter.

SET	Through DM RS232 V0.9 (Serial Transmission Communication
	interface) to remote control the device. To identify the monitor, you
	must to set an ID number (ID=1~99) to each of the monitor under
	DM RS232 V0.9 Control page.
ID	To set the ID number to control the monitor from the other.
TV	Select TV source.
VIDEO	Select VIDEO source.
S-VHS	Select S-VHS source.
Component	Select a Compound signal source:
	Y,Pb,Pr —For High definition component inputs.(CT-1890).
	Y,Cb,Cr—For Conventional component inputs.( CT-1890∕
	CT-1892).
VGA 1	Select VGA 1 source.
VGA 2	Select VGA 2 source.
TV∕PC∕AV	Select TV∕PC∕VIDEO∕S-Video∕COMPONENT∕switch
	source.
TV∕CATV	Select TV∕CATV source.
CH+∕CH-	Steps through the channels.
PIC-STD	Factory preset.
PIC∕PAGE ▲▼	Control and select items PIC-SEL button.
PIC-SEL	User video adjustment screens.

SYSTEM	Changes the video system on TV, Video, and S-VHS.
	System types are PAL, PAL-M, PAN-N, and SECAM.
FINE TUNING	Allows for fine-tuning of channels.
CH-LOCK	For Parental Control.
FIELD	A FIELD 1 or FIELD 2 toggle. (Useable only when CCD is
	on).
LANG	Language Selection (1 or 2).
CAP∕TXT	Accessible only when CCD is on.
CCD	Caption control.

Select a Compound signal source: