Corinex Global Powerline Router manual Adding Powerline Device Powerline Agent settings

Setup of Router SNMP Powerline Agent

If you need to add a powerline device that is not connected to the powerline now, you need to click on the Disconnected device check box. This action will give the possibility to remember the Powerline devices for future reference and use in an associated network structure.

Fig. 3.48 Adding a Powerline device - choosing Local and Powerline
	networks.
In the following window place a check mark on the Agent item (Fig. 3.49).		79
Default Powerline Agent configuration values will appear, assuming the
Agent is running on a local PC or Router. You should enter the IP address
of your Corinex Powerline Router in the Agent name/address field in this
dialog box. The insertions for the fields: Port, Read and Write community
must be in accordance with the naming of the Powerline Agent’s settings
(see SNMP Agent settings in the Powerline tab of the web based utility,
chapter 3.6) and after inserting these names and number settings, you
must click on the Next button to continue.

Fig. 3.49 Adding Powerline Device - Powerline Agent settings.

Corinex Powerline Router User Guide