CTX PR711FL How to Make On-Screen Display OSD Adjustments, OSD On-Screen Display Controls

Page 10

PR711FL User’s Manual

4. Up "" button

To adjust the selected OSD function or the contrast directly.

5. Down "" button

To adjust the selected OSD function or the brightness directly.

6. "ESC" button

To close the OSD manual and to escape function.

How to Make On-Screen Display (OSD) Adjustments

On-Screen Displays are called up from the front panel controls as noted above. Adjustments are made with "" , "" , "" and "ESC" control switches.

Power Saving Note:

This monitor is equipped with an automatic power-saving circuitry design that will work with any computer, which meets the VESA DPMS standard. It meets the ENERGY STAR low power state definition.

OSD (On-Screen Display) Controls

(1)Press "" to open the On-Screen menu function. Seven adjustment functions will appear on the On-Screen menu.

Press "" or "" button to scroll selections from top-down sequence as below.

Press "" to enter the item which is selected or to activate the preferred adjustments.

Press "ESC" to exit the On-Screen Menu or up level.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents E r ’ s M a n u a l Table of Contents FCC Statement Safety InstructionsSafety Precautions CE StatementPR711FL User’s Manual Recommendation for Optimum Performance Introduction System Setup InstallationUnpacking Installing the Tilt/Swivel Base Remove the Tilt/Swivel BaseControls and Adjustments Front Panel ControlsHow to Make On-Screen Display OSD Adjustments OSD On-Screen Display ControlsStatus PR711FL User’s Manual Converage Contrast/Brightness Trouble Shooting Problem What to doPR711FL User’s Manual Symptom Tip Two horizontal lines are visible on the screenPR711FL User’s Manual Power Consumption 120/230 Vac Vesa Power-Management ProposalEnergy Declaration Specification Connector Pin Assignments Reference InformationPreset Timing Chart Resolution Format Horizontal Refresh Rate Hz Frequency KHz
Top Page Image Contents