PR711FL User’s Manual

Signal Out of range.

Display image is not centered or is too small or too large.

Image is scrolling or is unstable

Picture is fuzzy or color looks blotchy.

Picture bounces or a wave pattern is present.

Readjust the signal based on spec. Reference "Scan Frequency".

Refer to "Controls & Adjustments." You need to adjust "Size" and "Position" of the image.

Make sure the signal cable is connected securely to the video card or computer.

Adjust Contrast and Brightness controls.

On all Models select the Degauss function in the OSD control menu.

(CAUTION: Allow a minimum of 20 minutes to elapse before depressing Degauss button again when not switching between modes. DO NOT HOLD THE BUTTON DOWN CONTINUOUSLY.)

Move devices that might be causing electrical interference away from the monitor. (See "FCC Information.")