Sanyo DWM-2600 Using RF Modulator, Example Unit, TV and RF Modulator connections

Using RF Modulator

If your TV does not have a Video input jack and has an antenna terminal only, please purchase the *RF Modulator (not supplied). (*Please consult your audio/video dealer.)

Example: Unit, TV and RF Modulator connections

RF Modulator

Partial back panel	A/V INPUT JACKS	TO TV	ANT. IN
		CHANNEL
	VIDEO R-AUDIO-L	3	4
		4
	3	2

To VIDEO OUT jack (Yellow)

1

TV

VHF/UHF

ANTENNA

IN

1.Connect the antenna cable (not supplied) to the ANT. IN terminal of the RF Modulator.

2.Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV.

3.Connect the Video cable with yellow connectors (supplied) between the VIDEO OUT jack of the unit and the VIDEO input jack of the RF Modulator.

4.Turn on the TV, and set the channel number (CHANNEL3 or CHANNEL4) on both TV and RF Modulator, whichever is not used for regular broadcasts in your area.

Note:

For more details, please refer to the instruction manual of the RF Modulator.

Example: Unit, VCR, TV and RF Modulator connections

LINE1(AUX1)

			TV
			To VIDEO OUT jack (Yellow)
		1	5	VHF/UHF
				ANTENNA
				IN
		VHF/UHF			3
	VIDEO	FROM ANT.
		IN
IN	OUT		A/V INPUT JACKS
				TO TV	ANT. IN
L	L			CHANNEL
		TO TV
R	R 3 4	OUT	VIDEO R-AUDIO-L	3	4
	AUDIO CHANNEL		Partial back panel	6
		4

6

2

HiFi Stereo VCR

RF Modulator

1.Connect the antenna cable (not supplied) to the VHF/UHF FROM ANT IN terminal of the VCR.

2.Connect the 75-ohm coaxial cable (not supplied) between the TO TV OUT terminal of the VCR and the ANT. IN terminal of the RF Modulator.

3.Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV.

4.Connect the audio cables (not supplied) between the VIDEO (AUDIO) IN 1 or 2 jacks of the unit and the AUDIO OUT jacks of the VCR. Use the red connectors for the right-R jacks and the white connectors for the left-L jacks.

5.Connect the Video cable with yellow connectors (supplied) between the VIDEO OUT jack of the unit and the VIDEO input jack of the RF Modulator.

6.Turn on the TV, and set the channel number (CHANNEL3 or CHANNEL4) on all TV, VCR and RF Modulator, whichever is not used for regular broadcasts in your area.

Note:

For more details, please refer to the instruction manual of the RF Modulator.

-E9-