Random Playback [CD]
1. Press [PROGRAM/RANDOM] once in the stop mode.
• “Random” appears on the TV screen.
1
2. Press [a] to begin random playback.
The unit will automatically select tracks at random.
Notes:
•To stop random playback, press [n].
• The
2
n
(Stop)
Programmed Playback [CD]
Up to 20 selections can be programmed.
Programming procedure
1.Press [PROGRAM/RANDOM] twice in the stop mode.
•“Program Mode” screen appears on the TV screen.
•
2.Press the number buttons to select the track number. Example:
To select Track No.3, press [0], then [3]. To select Track No.10, press [1], then [0]. To select Track No.24, press [2], then [4]. Notes:
•If you make a mistake, press [CLEAR].
•To quit the “Program Mode” screen, press [PROGRAM/ RANDOM].
3.Press [p] to move the highlighted box down. Example:
Program Mode |
|
|
|
| |||
All Clear |
|
|
|
|
| ||
1 | 03 | 6 | 11 | 16 | |||
2 |
| 7 | 12 | 17 | |||
3 | 8 | 13 | 18 | ||||
4 | 9 | 14 | 19 | ||||
5 | 10 | 15 | 20 | ||||
4.Repeat steps 2 and 3 as above to select other tracks.
5.Press [a] to start playback.
When all programmed selections have played, the unit stops automatically.
• The programmed contents are retained in memory.
Note:
To play the program again, press [PROGRAM/RANDOM] twice to call up the “Program Mode” screen, then press [a].
1
2
CLEAR
3
5
To clear the program one by one
1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.
2.Press [4] or [5] to select the track number.
3.Press [CLEAR].
To clear all the programs
1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.
2.Press [4] to select “All Clear”.
3.Press [ENTER].
To change the program
1.Press [PROGRAM/RANDOM] twice to display the “Program Mode” screen.
2.Press [4] or [5] to select the track number.
3.Press the number buttons to select the track number to be replaced.
Note:
To quit the “Program Mode” screen, press [PROGRAM/ RANDOM].