Hypercom ICE 5700 manual T5KBOOT Boot program name

Installation Procedures

If the terminal is not loaded with software, the displays shown in the following table are typical.

Table 2-3. Self-test and diagnostics when software is not loaded

Description	Terminal response
T5KBOOT: Boot program name	T5KBOOTXXX
XXX: Boot program release	WAIT SELF TEST
The memory page status indicates that no	MEMORY PAGE STATUS:
program is loaded.	BOOT: XXXX
	01: FFFFFFFFFFFFFFF
	17: FFFFFFFFFFFFFF
PE indicates Program Error. In this case, the	CONFIGURE TERMINAL
program is not loaded.	or CALL HELP - PE
	0: Restart
	1: Merchant Programming
	2: Program Load
	3: Clear Page Memory
	4: Maintenance Functions
	5: Fast Load

940310-001, rev. A Hypercom Corporation 2-5