Hypercom ICE 5700 manual Initialize the ICE Terminal, Transaction is complete

Chapter 3

Initialize the ICE Terminal

After the terminal receives a new program load, an initialization is required to start the terminal operations. In other cases such as a new card type, an initialization is requested to update the terminal parameters. An initialization takes approximately 30 seconds to complete.

During an initialization, the terminal automatically connects to the initialization host to receive the downloading of the initialization parameters, known as the terminal profile.

Step-by-Step

To initialize an ICE terminals:

Step	Action	Terminal response
	After a program load, the terminal displays the following		MAIN
	prompt.
		TERMINAL	SETUP
		TESTS	SUPERVISOR
1	Touch Initialize on the terminal display.		INITIALIZE
		CORRECT?
		YES OR NO
2	Touch Yes. The following screens appear.		COMMS
			Dialing now
	The terminal dials the host.		COMMS
			Processing now
	The terminal sends request information to the host.
		Transaction Complete
	The transaction is complete.	The terminal displays
		the Idle prompt.

3-4 ICE 5700 Hardware and Installation Operators Manual 940310-001, rev. A