Ken-A-Vision 7700 instruction manual Static

ADMIN TOOL 6

Network Type	Select a Static or Dynamic address scheme
	(static recommended).
Internet Address	Input a value to assign an IP address to the
	7700.
Subnet Mask	Input a value to assign a subnet mask to the
	7700.
Default Gateway	Input the IP address of the default gateway.
Primary DNS Server	Input the IP address of an ISP's DNS server.
Web Server Port	Input a TCP port number to assign a Web
	Interface port number to the 7700.
Video Server Port	Input a TCP port number to assign a Video
	Server port number to the 7700.
DDNS Server	Input DDNS server address.

NETWORK SETUP 4

Configure your 7700's TCP/IP properties as follows:

Network Type	STATIC
Internet Address	A private IP address such as 192.168.0.200
	[Example]
	A. You need to assign the 7700 an IP
	address, just as you would assign a PC.
	B. The IP address you assign must be unique
	on your network as assigned by a network
	administrator to avoid IP conflicts.
	C. The IP address you assign the 7700 must
	be a private IP. For information on how to
	choose a private IP please read the FAQ.
Subnet Mask	255.255.255.0 [Example]
	A. You must use the same subnet mask as
	the one you noted under "Current TCP/IP
	Settings".
Default Gateway	192.168.0.1 [Example]
	A. This IP address must be the IP address of
	your router (private or LAN side)
	B. Use the same Default Gateway you noted
	under "Current TCP/IP Settings"
Primary DNS Server	Use the 1st DNS Server from "Assigned IP
	Address from My ISP"
	A. If you did not receive any IP addresses
	from your ISP, please contact them and
	acquire the IP address of their DNS
	server.
Web Server Port	80 [default]
	A. You may select any number between
	1025-30000.
Video Server Port	7777
	A. You may select any number between
	1025-30000.

Network Video Flex® 7700 Manual www.ken-a-vision.com Network Video Flex® 7700 Manual www.ken-a-vision.com