Contents, Faq | Ken-A-Vision 7700 specification

	CONTENTS
1.	Introduction		3
	About This Manual		3
	Notes Before Starting		3
2.	7700 Installation		4
	Product Description		4
	Quick Start		6
3.	7700 Setup		8
	7700 Initial Setup via a Crossover Cable		8
4.	Network Setup		10
	Guide to Network Setup	10
	Case A : Static IP on Private LAN		11
	Case B : Static IP + Personal Router		12
	Case C : Static IP Direct to Modem		13
	Port Forwarding	15	14
	Starting the 7700	15
5.	Web Viewer		16
6.	Admin Tool		17
	Video Tool	17
	TCP/IP Tool		18
	SMTP Tool	19
	Date & Time Tool		20
	Users Tool		21
7.	Appendix		22
A : Determining Current TCP/IP setting			22
B : Changing your computer's IP address
	and subnet mask		23
C :Port Forwarding			24
8.	FAQ		25
9.	Notes		28
	Specifications		28
	Support		28

FAQ 8

I want to prevent users from viewing my camera.

wGo into Administration Tools of the 7700.

wClick on Users.

wDelete the user or all users by deleting the ID and password associated with that user.

Can I record the video?

Yes, you can record, but you will need to purchase a separate software program to allow PC-based recording. This software is available by contacting us. The softwarewill connect up to 16 separate 7700s for remote viewing, remote controlling, and remote recording without the loss of quality or size (up to 640 480 resolution).

I can access the video server on my LAN, but not from the Internet.

Verify that your router (if applicable) has port forwarding properly configured. Firewall issues may prevent user access.

Can I use Applied Vision or Vision Explorer with the 7700?

Ken-A-Vision's Applied Vision and Vision Explorer software applications were designed for USB cameras, and unfortunately they cannot interface directly with network cameras. However, if you wish to add USB connectivity to your 7700, you can purchase our USB Adapter (VFUSBAD2) which will allow you to connect the analog output of the 7700 to your computer, after which you will be able to use our software.

Can I use the 7700 on my dial-up Internet connection?

No, we recommend a high-speed broadband connection of at least 128Kb/sec.

I'm accessing my 7700 remotely over the Internet and the video stream is choppy, is this normal?

Yes. The frames per second received remotely are determined by your bandwidth capabilities both at your site where the 7700

is installed and	your	remote location.	The lower of the two sites
will determine	how	fast your video	stream is received. It is

recommended to have at least a 256Kb/sec upstream connec- tion from the site where the 7700 is installed. Lower speeds will operate properly, but provide poor remote performance. The faster the Internet connection at both ends, the faster the video stream.

Can I view multiple cameras at once?

You can view multiple cameras only	if you purchase the new
Ken-A-Vision network camera software,	which will connect up to
16 separate 7700s.

Network Video Flex® 7700 Manual

www.ken-a-vision.com

Network Video Flex® 7700 Manual

CONTENTS

FAQ 8