Ken-A-Vision 7700 instruction manual Admin Tool

Page 9

ADMIN TOOL 6

Current Date/Time It shows the current Date/Time setting stored in the 7700.

New Date/Time Date/Time can be set by the local computer, synchronized to an online time server, or manually set.

7700 SETUP 3

6.Now you will be able to access the viewer software with in the 7700

A.Open Internet Explorer and type the IP address of 192.168.1.80 (default IP of the 7700 from the factory) into the Address Bar of the web browser (as seen below). Press Enter.

B.If a message appears after pressing "Enter" similar to the image depicted below, choose "Try Again". This message will vary depending on the operating system.

7.Now you will be able to see the login screen for the 7700.

8.The default ID and Password are both "admin".

9.If at any time you are prompted to download ActiveX controls, you must click 'Yes', all content is safe.

A. You will have to click "Yes" twice to two individual prompts. This allows your video to be displayed in Internet Explorer.

Network Video Flex® 7700 Manual

www.ken-a-vision.com

Network Video Flex® 7700 Manual

www.ken-a-vision.com

Image 9
Contents 7700 Email Support support@ken-a-vision.comFAQ ContentsIntroduction My power switch is not litHow do I choose a private IP address? My 10M light is not flashing or solidInstallation Appendix Power IndicatorFor D-Link DI-604 broadband routers For Linksys BEFSR41 Cable/DSL routersFor Windows 98 / ME Users For Windows 98 / ME Users Admin Tool Admin Tool Network Setup Static Must have at least 2 static IPs received from your ISP Video ToolCase C Static Fixed IP Dedicated line directly to WEB Viewer Network SetupStarting