Jiaye General Merchandise Co BTP-M280 user manual Print and Tear-off Position

Page 11

BTP-M280 User’s Manual

2.5 Print and Tear-off Position

2.5.1 Print position

L1: Paper width

L2: Print width

L3: Print left margin

L4: Print right margin

According to the different paper width of the L1, the print width (L2) and the left/right margin (L3/L4) should be changed as below:

Paper width (L1)	Print width (L2)	Left margin (L3)	Right margin (L4)
80/76mm	63.4mm	6.8mm	5.8mm
69.5mm	57mm	6.8mm	5.7mm
57.5mm	47.5mm	6.8mm	3.2mm

2.5.2Tear-off position

L1: About 21.5mm

L2: About 34mm

- 7 -

Image 11

Contents Impact Receipt Printer Contents Maintenance Troubleshooting Trademarks DeclarationSafety Instructions General Safety InstructionOutline FeaturesOverview Main Specification SpecificationsPaper Specification Cutter specificationRibbon specification Print and Tear-off Position Outline and Parts Outline and PartsLEDs and Buzzer Table below shows LEDs and buzzer in error statusMounting the Printer InstallingUnpacking Connecting to a ground line Connecting the Cash Drawer Connecting the Power AdapterConnecting USB signal cable Connecting optional signal cableLoading Paper Roll Printer self-test Installing the Printer Driver Page Page Page ¾ Windows XP system ¾ Windows 98/Me system How to Use the Driver ¾ Setting paper type ¾ Color choose ¾ Single/ Bi-directional print setting ¾ Document setting option ¾ Download ¾ Version information Clear paper jam MaintenanceRoller cleaning Mark sensor cleaningPage Parallel interface Interface SignalUSB interface Ethernet Serial interfaceWlan Interface Board Pin Signal name InstructionCashdrawer definition Power interface definitionProblems during Printing TroubleshootingCutter error troubleshooting Error LED and BuzzerUSB Problems during Using Driver