Jiaye General Merchandise Co BTP-M280 user manual Printer self-test

Page 18

BTP-M280 User’s Manual

3）Ensure the paper head is trimmed and drop the paper roll into the paper cabinet.

4）Pull a certain length of paper along the paper-out direction, then close the back cover and tear off the surplus paper.

Caution：

—User should adjust the paper guide according to the width of paper roll being used.

—Paper roll should be loaded as shown:

—Paper roll should be rolled tightly to eliminate risk of paper jam or other faults.

—Paper should be loaded in paper cabinet firmly and straight; otherwise, paper auto-load and print will be affected.

—The edge of the paper head is not allowed to deviate from the paper path.

4.10 Printer self-test

4.10.1 Turn on the printer

1)Ensure the printer is connected with power cable.

2)Press “—” of the power switch to turn on and initialize the printer. 4.10.2 self-test

1)Ensure the printer is connected with power cable; sufficient ribbon and paper roll have been loaded.

2)Ensure the printer is powered off.

3)Hold FEED button while pressing “—” of the power switch. After ERROR LED flashes once, release FEED button. The printer will print out configuration information and following information: “Press and Release FEED key to print characters” and “Press and Hold FEED key to configure the printer”, then enter hold-on status. The PAPER LED flashes.

4)Press the FEED button for a short time, the printer will print a second page with a pattern using the built-in character sets; press the FEED button for a long time, the printer will enter into button configuration mode. For detail function and operation method of button configuration mode, please contact your dealer.

- 14 -

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Impact Receipt Printer Contents Maintenance Troubleshooting Declaration TrademarksGeneral Safety Instruction Safety InstructionsFeatures OverviewOutline Specifications Main SpecificationCutter specification Paper SpecificationRibbon specification Print and Tear-off Position Outline and Parts Outline and PartsTable below shows LEDs and buzzer in error status LEDs and BuzzerInstalling UnpackingMounting the Printer Connecting to a ground line Connecting optional signal cable Connecting the Power AdapterConnecting USB signal cable Connecting the Cash DrawerLoading Paper Roll Printer self-test Installing the Printer Driver Page Page Page ¾ Windows XP system ¾ Windows 98/Me system How to Use the Driver ¾ Setting paper type ¾ Color choose ¾ Single/ Bi-directional print setting ¾ Document setting option ¾ Download ¾ Version information Mark sensor cleaning MaintenanceRoller cleaning Clear paper jamPage Interface Signal USB interfaceParallel interface Serial interface EthernetPin Signal name Instruction Wlan Interface BoardPower interface definition Cashdrawer definitionError LED and Buzzer TroubleshootingCutter error troubleshooting Problems during PrintingProblems during Using Driver USB
Top Page Image Contents