Getting Going (the quick version)
The Junxion Box is designed to be simple to use. No additional software is required for most users. The remainder of the User Guide provides complete instructions for using the device. These abbreviated steps highlight the basics for a simple setup:
1.With the Junxion Box unplugged, insert the cellular modem into the card slot on the Junxion Box.
2.Plug the Junxion Box power adapter into the power connector on the back panel of the Junxion Box. Wait approximately two minutes to allow the Junxion Box and cellular modem to initialize.
3.Connect your computer to the Junxion Box with an Ethernet crossover cable.
4.If the cellular modem card is not automatically detected, first time users may need to configure their cellular modem through the WAN page in the Device Manager with their web browser at 192.168.2.1/admin. The username is admin and default password is junxion. For more details on configuring the Junxion Box, refer to the chapter titled “Using the Device Manager.”
6 | junxion box user guide |