Junxion JB-110B, JB110E manual Resetting Your Junxion Box, From the Device Manager

Page 36

Resetting Your Junxion Box

From the Device Manager

You can use the Device Manager to reset the Junxion Box to factory defaults without powering oﬀ the unit.

•First access the Device Manager by entering 192.168.2.1/admin (or the custom IP address you’ve conﬁgured for the Junxion Box LAN) into the address ﬁeld of your browser. The username is admin and the default password is junxion unless it has already been changed.

•To reset your Junxion Box settings, go to the Update Page and select the Factory Defaults Reset. This resets all of your settings (passwords, LAN and WAN conﬁguration, security settings, splash page, etc.) to the original factory settings.

If You Forget Your Device Manager Password

If you are unable to access the Device Manager, you can reset the Junxion Box during the boot process. Restart the Junxion Box by pressing the power cycle button or removing then re-inserting the power cable. After one to two minutes, the status light will begin to blink rapidly. Unplug the Junxion Box while the status light is rapidly blinking to reset all conﬁguration settings back to factory defaults.

Note. This procedure works only if the Factory Default Reset Option At Boot option is on. You’ll ﬁnd this option in the Update page; it’s on by default.

36	junxion box user guide

Image 36

Contents Junxion Box User Guide Page Table of Contents Page Introduction What’s Included with the Junxion Box?What Else Do You Need to Get Started? Getting Going the quick version Hardware Overview Turning On the Junxion BoxStatus Lights Ethernet Crossover CableJunxion Box Hardware Diagram Wi-Fi Antenna JB-110b only Power Cycle ButtonCellular PC Card Modem Slot Connecting the Junxion Box to the Internet Connecting Through a Cellular PC Card ModemSupported Cellular Card Modems Sprint Nextel Connection Charges Contacting Your Cellular CarrierConnecting a Computer to the Junxion Box Connecting Through EthernetConnecting Through Wi-Fi JB-110b only Junxion box user guide Where to Find More Help Using the Device Manager Opening the Device ManagerStatus Figure Status WAN Figure WAN Junxion box user guide Junxion box user guide Figure LAN Page JB-110b with Wi-Fi shown LAN Figure Port Forwarding Port Forwarding is unavailable if IP passthrough is enabled Port ForwardingFigure Security Page JB-110b with Wi-Fi shown Security Services Junxion box user guide Figure Services Figure Services Splash Figure Splash Figure Update Update About and Help Pages Guest User StatusResetting Your Junxion Box If You Forget Your Device Manager PasswordFrom the Device Manager Additional Support Technical Speciﬁcations WANAccessories HardwareSafety Information and Instructions Junxion box user guide Regulatory Information Limited Warranty and Liability Junxion box user guide Junxion Software License Readme Junxion box user guide Legal Disclosure