Introduction, Features | Yorkville Sound PS210PX specs

	CAUTION AVIS
	RISK OF ELECTRIC SHOCK
	DO NOT OPEN
	RISQUE DE CHOC ELECTRIQUE
	NE PAS OUVRIR
230V			120V
50Hz			60Hz
1.3A	Yorkville	LR 21877	2.5A
DESIGNED AND MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA

INTRODUCTION

The PULSE model PS210PX is a compact powered subwoofer with a 300-watt amplifier for the dual 10- inch high-performance woofers built-in, plus an additional 300-watt amplifier to power full-range speakers. Quick and easy setups are facilitated with features such as a LINE/SPEAKER pushbutton which enables you to drive the PS210PX's inputs with either LINE level signal (i.e. from a mixer's MAIN LINE output), or with a SPEAKER level output signal, directly from an amplifier or a powered mixer. Also, the inputs are balanced so that noise cancellation will be optimized when a balanced line-level source is connected; however an unbalanced line-level source may also be connected, without need for special adjustments or cable adapters. An internal electronic crossover is also provided along with a 3-position CROSSOVER FREQUENCY switch as well as LEVEL controls for both the PS210PX and the SATELLITE amplifiers.

FEATURES

1. SATELLITE POWER AMPLIFIER OUTPUTS

These are for powering your full-range enclosures. The SATELLITE power amplifier (like the SUBWOOFER's amp) is mono, therefore these are parallel outputs. The minimum overall load rating is 4-ohms. So, be sure that you connect no more than two 8-ohm enclosures or one 4-ohm enclosure to the PS210PX.

2. POWER SWITCH, FUSE & LED

The POWER switch and FUSE are located on the left side of the back panel. Always replace the fuse with the same type (5A slo-blo in North America, T2, 5A in Europe). The POWER LED is on the right-side of the back panel, just above the SWITCHABLE CROSSOVER FREQUENCY selector.

3.SWITCHABLE X-OVER FREQ. SELECTOR

The PS210PX features an electronic crossover with a switchable High-Pass filter for your full-range speaker cabinets as well as a Low-Pass filter for the SUBWOOFER. It also has three selectable crossover points to choose according to the size and response of the woofer/s in your full range enclosures. Set this switch as follows:

TOP POSITION

80Hz

for use with the PULSE P-15, PL315, or other enclosures with 15" woofers.

MID POSITION

110Hz

for use with the PULSE P-12, PL12, or other enclosures with 12" woofers.

BOTTOM POSITION 150Hz

for use with the PULSE P-10 , PL10 or other enclosures with 10" woofers.

Note: The top position will allow the satellite to produce a full-range response with only subsonic filtering.

4. SATELLITE AMPLIFIER & POWERED SUBWOOFER DB LEVEL CONTROLS

The SATELLITE AMPLIFIER dB LEVEL control regulates the volume of your full-range enclosures while the SUBWOOFER dB LEVEL control regulates the PS210PX's volume. Set these controls for the desired overall volume level. In order to approximate subwoofer/full-range unity gain, set both controls at 0dB. At high operating levels, the subwoofer and satellite power amplifiers will be regulated by a limiter. As a result you may find that increasing the SUBWOOFER dB LEVEL control well above the 0dB setting will have little effect. This is normal, and simply means that maximum, undistorted, subwoofer volume has been achieved.

PS210PX specifications

The Yorkville Sound PS210PX is a powerful and versatile powered subwoofer designed to deliver impressive low-frequency performance in a compact and easy-to-use package. It is particularly popular among musicians, DJs, and sound engineers who require robust sound reinforcement for various live events and installations. The PS210PX combines advanced technology with premium components to achieve a reliable and high-quality audio experience.

One of the main features of the PS210PX is its dual 10-inch woofers, which are engineered to produce deep and punchy bass frequencies. This configuration allows the subwoofer to generate a stunning low-end response, making it an ideal choice for genres that demand clarity and power, such as electronic, hip-hop, and rock music. The subwoofer efficiently handles high sound pressure levels, ensuring consistent performance even in larger venues.

The PS210PX is powered by a class D amplifier, which provides 2,000 watts of peak output power. This level of amplification ensures that the subwoofer can easily keep up with loud stage performances or large gatherings, offering clear and dynamic sound reproduction. The built-in amplifier is designed for efficiency, resulting in a lightweight and portable unit that can be easily transported and set up.

Another notable characteristic of the PS210PX is its user-friendly interface. The rear panel features a range of input and output options, including XLR and 1/4-inch connections for versatile compatibility with a variety of audio sources. Additionally, a built-in crossover allows users to adjust the frequency response, enabling seamless integration with other speakers in the sound system.

Durability is also a focus for the PS210PX. The robust enclosure is constructed from high-quality materials, ensuring that it can withstand the rigors of traveling and frequent use. The rugged design is complemented by protective corners and a sturdy grill, which help to safeguard the woofers from damage.

Overall, the Yorkville Sound PS210PX stands out as a top-tier powered subwoofer that effectively combines power, portability, and performance. Its advanced features and thoughtful design make it a reliable choice for anyone seeking to enhance their audio experience, making it suitable for a wide range of applications from live performances to professional installations.