Roland BR-864 Conserving battery power Power Save, Deactivating the power save function

Conserving battery power (Power Save)

Your BR-864 is equipped with a power save function that limits the current dissipation during use.

When the power save function is activated, if no button, or TIME/VALUE dial on the BR-864 is used for a certain amount of time, the BR-864 will enter the standby state and turn off the display backlight and button indicators.

Also, when in the standby state, the display will appear as shown below.

fig.05-701d

*The power save function is especially helpful when the BR-864 is running on battery power.

Perform the procedure given below to activate the power save function.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “SYS,” and press [ENTER].

3.Press CURSOR [ ] [ ] to select “PowerSave,” and turn the TIME/VALUE dial to set the time until the

Power Save function is activated.

Valid Settings: OFF, 1min, 3min, 5min, 10min

fig.05-704d

4.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

Deactivating the power save function

Press any of the panel buttons to deactivate power save.

*After the power save function is deactivated, the Play screen appears.

fig.05-703d

150