Roland BR-864 Switching the Rhythm Guide mode, Performing arrangements and patterns, Section

About the Rhythm Guide

Switching the Rhythm Guide mode

The Rhythm Guide mode switches each time [ARRANGE/

PATTERN/OFF] is pressed.

[ARRANGE/PATTERN/OFF]: Lit

(Arrangement Mode)

Performance and programming of arrangements is enabled. Press [PLAY] to start the performance of the arrangement.

* You cannot play back or record during programming.

[ARRANGE/PATTREN/OFF]: Flashing

(Pattern Mode)

Performance and programming of patterns is enabled. Press [PLAY] to start the performance of the pattern.

* You cannot play back or record during programming.

[ARRANGE/PATTERN/OFF]: Unlit (OFF)

The Rhythm Guide does not play.

Performing arrangements and patterns

Selecting arrangements

This procedure selects the arrangement to be played with the

Rhythm Guide.

1.Press [ARRANGE/PATTERN/OFF] repeatedly until the

indicator is lit.

fig.03-201d

P: Preset / S: Song

Number Arrangement Name

2.		Section
	Select the arrangement.
	Use CURSOR [ ] [ ] and the TIME/VALUE dial to	3
	select the Preset/Song and number.
	P01–P50: Preset arrangements 1–50
	S01–S05: Song arrangements 1–5
3.	Press [EXIT] to return to the Play screen.

Performing arrangements

1.Make sure performance of the song is stopped, then press [ARRANGE/PATTERN/OFF] repeatedly until the

indicator is lit.

fig.03-202d

2.Select an arrangement.

Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the Preset/Song and number.

3.Move the RHYTHM GUIDE fader to the positions

shown in the figure below.

fig.03-203

4.Press [ZERO] to reset the play position back to the beginning of the song, then press [PLAY].

The selected arrangement is performed.

91