Roland BR-864 Turning off the power, Removing the memory card, Recording/playing back a song

Recording/playing back a song

4.Turn the TIME/VALUE dial to select the V-track to which you want to record.

*In this case, although the source and destination tracks in this recording process are the same. You cannot make these changes on other tracks.

The next V-Track after the recording source is automatically selected as the recording-destination V-Track.

5.Press [ENTER].

Return to the Play screen.

*At this point, the Mastering Tool Kit is automatically selected as the effect.

6.Press [REC].

[REC] flashes in red and the BR-864 enters the recording standby state.

Flash

7.Press [PLAY].

The [REC] and REC TRACK buttons stop flashing in red and instead light solidly, and recording (mastering) starts.

Lit

8.When you finish recording (mastering), press [STOP]. The REC TRACK button lights alternately in orange and green, indicating that track contains recorded data.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

(12) Turning off the power

To turn off the power, use the procedure described in “Turning off the power” (p. 28).

Before you turn off the BR-864, make sure to first stop any recording. If the BR-864 is turned off during playback/recording where the memory card is being accessed, the recorded data, mixer settings, and effect patch data may be lost.

(13) Removing the memory card

The power of the BR-864 must be turned off before removing a memory card. If a memory card is inserted when the power is turned on, the data in the memory card may be destroyed, or the memory card may become unusable.

44