Roland BR-864 Adjusting how the loop effect is applied, Section, Using the loop effects/Track EQ

Using the loop effects/Track EQ

Adjusting how the loop effect is applied

The following explains how you can alter the volume of the signals sent by each track to the loop effects (the send level), and control the degree to which the loop effects are applied.

1.Press [LOOP EFFECTS].

2.Press CURSOR [ ] [ ] to move the cursor to “CHO/

DLY” or “REV,” and press [ENTER].

fig.01-705d

3.Press CURSOR [ ] [ ] to select the screen for setting the send level of each track appears.

When using CHO/DLY

fig.01-706d

When using REV

fig.01-707d

4.Use [CURSOR] and the TIME/VALUE dial to adjust the send level for each track.

*Pressing a REC TRACK button moves the cursor to the track corresponding to the button pressed.

Pressing [TRACK] switches to between Tr1–4 and Tr5–8.

If you then press CURSOR [ ], the screen for setting the input-source send level appears in the display; if you

press CURSOR [ ], the one for setting the rhythm guide send level is displayed.

fig.01-708d

fig.01-709d

To adjust the send level for the input source, move the cursor to “In Send.” To adjust the send level for the rhythm guide, move the cursor to “Rhy Send.” The setting is adjusted by turning the TIME/VALUE dial to the desired value.

5.After you have completed adjusting the send level, press [EXIT] repeatedly to return to the Play screen

You can switch screens in the following sequence, with the screen cycling to the next screen each time [LOOP EFFECTS] is pressed.

Loop Effects selection screen → Send Level screen → Type screen → Play screen

Section 1

63