Roland BR-864 Moving a complete track ALL, Editing the performance on a track Track Editing

Editing the performance on a track (Track Editing)

5.Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the track/V-Track to move from, and track/V-

Track to move to.

6.Press [ENTER].

7.Use [CURSOR] and the TIME/VALUE dial to specify the beginning of the portion “S” (Start) of data you want to move.

8.Press [ENTER].

9.Use [CURSOR] and the TIME/VALUE dial to specify the ending of the portion “E” (End) of data you want to move.

10. Press [ENTER].

11.Use [CURSOR] and the TIME/VALUE dial to specify the time of the beginning of the location “T” (To) where you want the data moved.

12.When you are ready to execute the move, press [ENTER]. The display will ask “Are you sure?,” so that you can confirm the operation.

13.Press [ENTER].

Move Event is executed.

14.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

*After specifying the time in the procedure above, a “+” may appear to show that there is a discrepancy between the actual current position and the position displayed. If you specify the locations using measures, specify the locations at each screen using the TIME/VALUE dial to eliminate the discrepancy.

You can also enter the time using [LOCATOR], [ZERO], [STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/OUT].

Moving a complete track (ALL)

Perform the procedure given below to move the complete

data from one track to another.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “TRK,” and press [ENTER].

3.Press CURSOR [ ] [ ] to move the cursor to “MOV,” and press [ENTER].

4.Turn the TIME/VALUE dial to select “ALL” and press [ENTER].

78