Roland BR-864 owner manual Moving by specifying the time TME/MES, Section

Editing the performance on a track (Track Editing)

3.Press CURSOR [ ] [ ] to move the cursor to

“MOV,” and press [ENTER].

fig.02-324d

4.Turn the TIME/VALUE dial to select “AB” and press

[ENTER].

fig.02-325d

5.Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the track/V-Track to move from, and track/V-

Track to move to.

6.Press [ENTER].

fig.02-326d

7.Use CURSOR [ ] [ ] and the TIME/VALUE dial to specify the time of the beginning of the location “T”

(To) where you want the data to be moved.

8.When you are ready to execute the move, press [ENTER]. The display will ask “Are you sure?,” so that you can confirm the operation.

9.Press [ENTER].

Move Event is executed.

10.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

Moving by specifying the time (TME/MES)

Perform the procedure given below to move the portion

between specific times.

Ex. 1: Moving twice to the same track

fig.02-327

					Section
	START	END	TO	Time
Ex. 2: Moving twice to another track					2
fig.02-328

START END TO Time

1.Press [UTILITY].

2. Press CURSOR [ ] [ ] to move the cursor to “TRK,” and press [ENTER].

fig.02-329d

3. Press CURSOR [ ] [ ] to move the cursor to “MOV,” and press [ENTER].

fig.02-330d

4.Turn the TIME/VALUE dial to select “TME/MES” and press [ENTER].

77