Roland BR-864 owner manual Loop Effect Parameter Functions, Setting Procedure

Loop Effect Parameter Functions

Setting Procedure

1.Press [LOOP EFFECTS].

2.Press CURSOR [ ] [ ] to move the cursor to “CHO/

DLY” or “REV,” and press [ENTER].

fig.01-701d

3.Press CURSOR [ ] [ ] until “FX Type” or “Type” is displayed, then turn the TIME/VALUE dial to select the

loop effect.

4.To change the settings for the selected effect, press CURSOR [ ] [ ] to select the parameter and turn the

TIME/VALUE dial to change the set value.

fig.01-704d

5.When you finish making settings,

press [EXIT] repeatedly to return to the PLAY screen.

When using CHO/DLY

Select from “CHORUS,” “DELAY,” or “DBLN”

(doubling).

fig.01-702d

When using REV

Select either “HALL” or “ROOM.”

fig.01-703d

Section 4

131