Roland owner manual Initializing the Memory Card, Section, Initializing the BR-864’ssettings

Initializing the BR-864’s settings

Initializing the Memory Card

Be aware that when initialized, any existing data on the card will be erased.

*If you initialize the memory card supplied with the BR-864, the demo songs on the card will be lost.

Before you insert or remove a memory card, always turn off the BR-864 first.If a memory card is inserted when the power is turned on, the data in the memory card may be destroyed, or the memory card may become unusable.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “INI,”

and press [ENTER].

fig.05-609d

4.To continue the initialization, press [ENTER] (YES). To cancel, press [EXIT] (NO) (or [UTILITY]).

When [ENTER] is pressed, initialization begins.

When the initializing has been completed, “Completed!” appears in the display.

“Keep power on! Song creating...” then appears in the display, and a new song is automatically created.

In this case, the data type selected is HiFi (MT2). When creation of the song is finished, the play screen returns to the display.

*Depending on the capacity of the memory card, initializing may take more than ten minutes to complete. This is not a malfunction.The progress of the initializing is shown in the display. Do not turn off the BR-864 until the initializing has been completed.

Do not remove the memory card or turn off the BR-864 while the display shows “Keep power on!” Doing so can destroy the data on the memory card and/or render the memory card itself unusable.

3.Press CURSOR [ ] [ ] to move the cursor to “CRD,” and press [ENTER].

The confirmation message “Are you sure?” appears in

the display.

fig.05-610d

Section 5

149