Roland BR-864 Setting the repeat portion with accurate timing, Repeating Playback Repeat

Models: BR-864

1 200
Download 200 pages 54.47 Kb
Page 50
Image 50
Setting the repeat portion with accurate timing

Repeating Playback (Repeat)

Setting the repeat portion with accurate timing

Normally, the repeat start and end points are registered at the exact position where [REPEAT] is pressed. This may make it difficult for you to set the repeat portion exactly as you desire.

If this is the case, you can use the quantize function to have the time [REPEAT] is pressed be adjusted to the timing of the song.

The quantize function allows you to set the timing in one- measure units.

Perform the procedure given below to use the quantize function.

1.Press [UTILITY].

2.Press CURSOR [ Manual background ] [ Manual background ] to move the cursor to “SYS,” and press [ENTER].

3.Press CURSOR [ Manual background ] [ Manual background ] to select “AB Qtz,” and turn the TIME/VALUE dial to turn the setting on.

When off, the quantize function will not work.

4.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

*Changing the tempo after having made the quantize function settings in a repeated portion will result in timing discrepancies between the repeat start and end points and the beginnings and ends of measures.

*You can set the repeat portion to one measure by pressing [REPEAT] twice at the same position.

When the repeat portion is set, you can use the following functions to edit your recorded track data.

Copying the repeat portion (p. 73)

Moving the repeat portion (p. 76)

Erasing the repeat portion (p. 79)

Before using these functions, you can use the quantize function to set the repeat portion with accurate timing.

50

Page 50
Image 50
Roland BR-864 owner manual Setting the repeat portion with accurate timing, Repeating Playback Repeat