Roland owner manual Backing up the BR-864’sdata, With Windows, BOSS BR-864

Backing up the BR-864’s data

With Windows

1.Connect your computer and the BR-864 with a USB cable.

2.Confirm that the recorder is stopped, then press [USB]. The USB function select screen appears.

3.Select “BACKUP” with the TIME/VALUE dial, then press [ENTER].

The Idling screen appears in the display.

fig.06-103d

*You cannot carry out the following procedure unless the Idling screen is displayed. Refer to p. 182 for instructions on resolving this problem.

The “BOSS_BR-864” (or “Removable Disk (*:)”) icon is

added to the computer.

fig.06-104

(Ex.)

BOSS_BR-864 Removable Disk (*:)

4.Back up the data.

1)Click the “BOSS_BR-864” (or “Removable Disk (*:)”) icon.

2)Drag the “ROLAND” folder to the computer’s

folder and drop it in the folder.

fig.06-105d

When restoring data backed up on a computer to the BR-864, drag the “ROLAND” folder to the “BOSS_BR-864” icon (or the “Removable Disk (*:)” icon) and drop it there (overwriting it).

5.Quit the connection to the computer.

In My Computer, right-click on the “BOSS_BR-864” icon (or “Removable Disk (*:)” icon) to “Eject” the disk.

*If this procedure fails to eject the disk, use the procedure below.

1)Click the icon in the task tray, then click the “Stop USB Disk—drive (*:)” message displayed

there.

fig.06-105a

Task Bar Task Tray

2)Click [OK] in the “Safe To Remove Hardware” dialog box that appears.

6.Press the BR-864’s [EXIT].

The USB function select screen returns to the display.

*If you press [EXIT] without quitting the connection to the computer, the following screens appear. In this case, pressing [ENTER] returns the USB function select screen to the

display.

fig.06-106ad

7.When backup of the data is complete, press [EXIT] to return to the Play screen.

At this point, you can safely disconnect the USB cable from the BR-864 and the computer.

When you have finished backing up the data, the Idling

screen returns to the display.

158