Roland BR-864 owner manual Erasing a complete track ALL, Section

Editing the performance on a track (Track Editing)

5.Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the track/V-Track to erase from.

6.Press [ENTER].

fig.02-347d

7.Use [CURSOR] and the TIME/VALUE dial to specify the beginning of the portion “S” (Start) of data you want to erase.

8.Press [ENTER].

fig.02-348d4

9.Use [CURSOR] and the TIME/VALUE dial to specify the ending of the portion “E” (End) of data you want to erase.

10.When you are ready to execute the erasure, press [ENTER].

The display will ask “Are you sure?,” so that you can confirm the operation.

11.Press [ENTER].

The erasure is executed.

12.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

*After specifying the time in the procedure above, a “+” may appear to show that there is a discrepancy between the actual current position and the position displayed. If you specify the locations using measures, specify the locations at each screen using the TIME/VALUE dial to eliminate the discrepancy.

You can also enter the time using [LOCATOR], [ZERO], [STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/OUT].

Erasing a complete track (ALL)

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “TRK,”

and press [ENTER].

fig.02-349d

Section 2

3. Press CURSOR [ ] [ ] to move the cursor to “ERS,” and press [ENTER].

fig.02-350d

4.Turn the TIME/VALUE dial to select “ALL” and press

[ENTER].

fig.02-351d

5. Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the track/V-Track to erase.

6.When you are ready to execute the erasure, press [ENTER].

The display will ask “Are you sure?,” so that you can confirm the operation.

7.Press [ENTER].

The erasure is executed.

8.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

81