Utility parameter list

Utilities include the following:

“System parameters” for setting functions affecting the entire BR-864

“Sync parameters” for setting synchronized performance functions

“Scrub parameters” for setting scrub functions

“Insert mode” for setting effect functions

About the System parameters

This section describes the System parameters.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “SYS,” and press [ENTER].

3.Using CURSOR [ ] [ ], select the System parameter, then make the setting with the VALUE/TIME dial.

LCD Contrast

Valid Settings: 1–32 (Initial value: 13)

This sets the display contrast.

Foot Switch Assign (Foot SW)

Valid Settings: PLAY, PUNCH, FX (Initial value: PLAY)

This sets the function for the foot switch (an optional FS-5U or DP-2) connected to the FOOT SWITCH jack.

PLAY: Controls the recorder’s PLAY and STOP functions.

PUNCH: Controls Punch In/Out.

FX: Controls the effects On/Off.

Audio Sub Mix Switch (Sub Mixer)

Valid Settings: ON, OFF (Initial value: ON)

This setting turns the Audio Sub Mix function (output mix of the external inputs from LINE IN) on and off.

Internal mic switch (Onbrd Mic)

Valid Settings: ON, OFF (Initial value: ON)

This setting turns the internal mic on and off.

AB Quantize (AB Qtz)

Valid Settings: ON, OFF (Initial value: OFF)

This setting turns the “Quantize function” on and off. “Quantize” is a function that enables you to set the start and end points in measure units when making the settings for repeat playback (the repeated portion).

Remain Information (Remain Inf)

Valid Settings: ON, OFF (Initial value: OFF)

This indicates the remaining amount of recording time available in the display during recording standby or while recording is in progress.

Power Save Mode (PowerSave)

Valid Settings: OFF, 1, 3, 5, 10 (min) (Initial value: OFF)

This setting turns the “Power Save function” on and off.

“Power Save” is a function that reduces power consumption through such power-saving measures as switching off the display’s illumination if no operation is performed for a set period of time (for one, three, five, or ten minutes). This is effective in preventing excess battery drain.

About the Sync parameters

This section describes the Sync parameters.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “SYNC,” and press [ENTER].

3.Using CURSOR [ ] [ ], select the Sync parameter, then make the setting with the VALUE/TIME dial.

Rhythm Guide MIDI Channel (RhyMIDI ch)

Valid Settings: 1–16, OFF (Initial value: 10)

This sets the MIDI channel for the Rhythm Guide performance data output from the MIDI OUT connector. No data is output when this is set to OFF.

Sync Generator (Sync Gen)

Valid Settings: OFF, MTC, MCK (Initial value: OFF)

This sets the synchronization signals output from the MIDI OUT connector.

OFF: No synchronization signal is output from

MIDI OUT.

MTC: MTC synchronization signals are output from

MIDI OUT.

MCK: MIDI CLOCK synchronization signals are output from MIDI OUT.

MMC Master

Valid Settings: ON, OFF (Initial value: OFF)

This setting determines whether or not the Master MMC code is output from the MIDI OUT connector.

Section 5

151

Page 151
Image 151
Roland BR-864 owner manual Utility parameter list, About the System parameters, About the Sync parameters

BR-864 specifications

The Roland BR-864 is a compact and powerful digital recorder designed for musicians, songwriters, and audio producers seeking high-quality recording solutions without the complexity of larger studio equipment. With its user-friendly interface and impressive features, the BR-864 stands out as a versatile tool for capturing music ideas, practice sessions, and full-fledged recordings.

At the heart of the BR-864 is its ability to record up to eight tracks simultaneously. This is a significant advantage for musicians who often find themselves layering various instruments and vocals. The device features a built-in high-quality microphone and two combo input jacks, allowing for easy connectivity of guitars or microphones. Additionally, the BR-864 supports both XLR and 1/4-inch inputs, providing flexibility for a variety of sound sources.

One of the standout technologies of the BR-864 is its 16-bit/44.1kHz uncompressed audio quality. This ensures that recordings maintain their clarity and detail, making it suitable for both studio and live settings. Musicians can easily engage with the onboard effects including reverb, delay, and compression, which helps enhance the overall sound without needing to rely on external equipment.

The BR-864 also features a built-in metronome and a variety of rhythm patterns to aid in practice and songwriting. This feature is particularly beneficial for musicians looking to develop their timing and arrangement skills. The device is equipped with a multi-track editing feature, allowing users to cut, copy, paste, and loop tracks with precision, resulting in a polished final product.

For ease of use, the BR-864 includes an intuitive LCD screen display, which helps users navigate its numerous features quickly. The onboard effects and editing tools are accessible via a series of simple buttons, which is especially advantageous for those who may not be technically inclined.

The unit is powered by batteries or an AC adapter, making it portable and ideal for taking to gigs or rehearsals. Its robust design ensures durability, allowing it to withstand the rigors of regular use. The BR-864 also provides USB connectivity, enabling easy file transfer to computers for further mixing, editing, or sharing.

Overall, the Roland BR-864 combines portability, functionality, and high-quality sound into a single unit that caters to the needs of modern musicians. Its wide range of features makes it an ideal choice for anyone looking to create, edit, and produce music effectively and efficiently.