Roland Initializing the BR-864’ssettings, Initializing all the BR-864’ssettings, Section

Initializing the BR-864’s settings

Initializing all the BR-864’s settings

The following settings are initialized together at one time.

•System Settings

•Effects (User Patches/Song Patches)

•Rhythm Guide (Arrangements/Patterns/Drum Kits)

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “INI,”

and press [ENTER].

fig.05-601d

3.Press PARAMETER CURSOR [ ] [ ] to move the cursor to “ALL,” and press [ENTER].

The confirmation message “Are you sure?” appears in

the display.

fig.05-602d

4.To continue the initialization, press [ENTER] (YES). To cancel, press [EXIT] (NO) (or [UTILITY]).

When [ENTER] is pressed, initialization begins. After the initialization has been completed, you are returned to the Play screen.

You can perform the same initialization with “INIT ALL,” by holding down INPUT SELECT [GUITAR/ BASS], [MIC], and [LINE] while turning the POWER switch ON, then pressing [ENTER].

Initializing the system settings

Follow the procedure below to initialize the system parameters.

A list of the initial settings for each parameter is given in the “Parameter List” (p. 178).

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “INI,”

and press [ENTER].

fig.05-603d

3.Press CURSOR [ ] [ ] to move the cursor to “SYS,” and press [ENTER].

The confirmation message “Are you sure?” appears in

the display.

fig.05-604d

4.To continue the initialization, press [ENTER] (YES). To cancel, press [EXIT] (NO) (or [UTILITY]).

When [ENTER] is pressed, initialization begins. After the initialization has been completed, you are returned to the Play screen.

Section 5

147