Roland BR-864 owner manual About the effects Insert mode, Section, Utility parameter list

Utility parameter list

About the effects Insert mode

This section describes Insert mode.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “SYS,” and press [ENTER].

3.Make the setting with the TIME/VALUE dial.

Insert Mode

Valid Settings:

INPUT<NORMAL>, INPUT<REC DRY>, TRACK 1–8, TRACK 1&2–7&8, RHYTHM, MASTER

(Initial value: INPUT<NORMAL>)

This sets the target to which the insert effects are applied. You can use this setting to apply insert effects to sounds that have already been recorded to the tracks.

INPUT<NORMAL>:

Effects are applied to the input source. This mode is normally set as the default.

fig.05-801

TRACK 1

(REC)

INPUT<REC DRY>:

You can monitor the sound of the input source with the effects applied, but only the dry sounds, without the effects applied, are recorded.

fig.05-802

TRACK 1

(REC)

TRACK 1–8, TRACK 1&2–7&8:

Effects are applied to each of the selected tracks.

RHYTHM:

Effects are applied to the Rhythm Guide sounds.

fig.05-804

Rhythm

Guide

MASTER:

Effects are applied to the sounds from the master output.

fig.05-805

TRACK 1

(PLAY)

TRACK 2

(PLAY)

TRACK 8

(PLAY)

Rhythm

Guide

Section 5

fig.05-803

TRACK 1

(PLAY)

153