Roland BR-864 owner manual Copying a complete track ALL, Section

Editing the performance on a track (Track Editing)

fig.02-319d

5.Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the track/V-Track to copy from, and track/V-

Track to copy to.

6.Press [ENTER].

fig.02-314d

7.Use [CURSOR] and the TIME/VALUE dial to specify the beginning of the portion “S” (Start) of data you want to copy.

8.Press [ENTER].

fig.02-315d

9.Use [CURSOR] and the TIME/VALUE dial to specify the ending of the portion “E” (End) of data you want to copy.

10.Press [ENTER].

fig.02-316d

11.Use [CURSOR] and the TIME/VALUE dial to specify the time of the beginning of the location “T” (To) where you want the copied data to be placed.

12.Press [ENTER].

fig.02-317d

13.Turn the TIME/VALUE dial to select the number of copies you want to be placed.

14.When you are ready to execute the copy, press [ENTER].

The display will ask “Are you sure?,” so that you can confirm the operation.

15.Press [ENTER].

The copy is executed.

16.Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

*After specifying the time in the procedure above, a “+” may appear to show that there is a discrepancy between the actual current position and the position displayed. If you specify the locations using measures, specify the locations at each screen using the TIME/VALUE dial to eliminate the discrepancy.

You can also enter the time using [LOCATOR], [ZERO], [STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/ OUT].

Copying a complete track (ALL)

Perform the procedure given below to copy the complete

recorded data from one track to another.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “TRK,”

and press [ENTER].

fig.02-318d

3.Press CURSOR [ ] [ ] to move the cursor to “CPY,” and press [ENTER].

Section 2

75