Roland BR-864 owner manual Saving insert effects settings Write, Using the insert effects

Using the insert effects

Edited effect settings are temporary. If you exit the Edit Effect screen without saving the effect patch you changed, “TMP” appears next to the indication of the bank.

Be aware that if you select a new effect patch while “TMP” is displayed, the altered effect patch is returned to its original settings and the changes are lost.

Saving insert effects settings (Write)

Follow the procedure below to enter a name (patch name) for an effect that you’ve modified, and save it as a new effect patch.

*You cannot save an effect patch during the recording or playback of a song.

1.Entering the patch name.

*If you do not need to change patch name, go to “4.”

At the Edit Effect screen, press CURSOR [ ] [ ] to move the cursor to “NAME,” and press [ENTER].

The Patch Name Setting screen appears.

2.Use [CURSOR] and the TIME/VALUE dial to enter the patch name.

* Press [ENTER] to switch between uppercase and lowercase.

3.After you have completed entering the effect settings and patch name as desired, press [EXIT] to return to the screen (Effect Edit screen) two screens previous.

4.Press CURSOR [ ] [ ] to move the cursor to “WRITE,” and press [ENTER].

5.Turn the TIME/VALUE dial to select the number to which to write the new effect patch.

6.After you’ve selected the destination, press [ENTER]. After the save has been completed, you are returned to the Edit Effect screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

58