Roland BR-864 Track EQ Parameter Functions, Setting Procedure, Parameter List, Section, On/Off

Track EQ Parameter Functions

Setting Procedure

1.Press [EQ].

2.Use [CURSOR] and the TIME/VALUE dial to set the EQ On/Off for each track.

* Pressing a REC TRACK button moves the cursor to the track

corresponding to the button pressed.

fig.04-401d

3.To change the EQ settings, press CURSOR [ ] repeatedly to display the parameter screen, then turn

the TIME/VALUE dial to change the settings value.

fig.04–402d

Parameter List

This is a Four-band equalizer that is independent for each track.

If you adjust the equalizer while listening to the sound, you may notice a clicking noise. This is not a malfunction. If the noise is objectionable, make adjustments while the sound is not playing.

On/Off OFF, ON

This parameter turns the equalizer effect on/off.

Lo G -12– +12 dB

This sets the gain (-12 to +12 dB) for the low-range equalizer (shelving type).

Lo F 40 Hz–1.5 kHz

This sets the center frequency (40Hz to 1.5 kHz) for the low-range equalizer (shelving type).

Hi G -12 – +12 dB

This sets the gain (-12 to +12 dB) for the high-range equalizer (shelving type).

Hi F 500 Hz–18.0 kHz

This sets the center frequency (500 Hz to 18 kHz) for the high-range equalizer (shelving type).

4.After you have completed the setting, press [EQ] or [EXIT] to return to the Play screen.

Section 4

133