Roland BR-864 owner manual Mastering, 1 2,4 3,5 2,4 8, Quick Start, Recording/playing back a song

Recording/playing back a song

5.Press [PLAY].

The [REC] and REC TRACK buttons stop flashing in red

and instead light solidly, and recording starts.

fig.00-447

Lit

6.When you finish recording, press [STOP].

The REC TRACK button lights alternately in orange and green, indicating that track contains recorded data.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

If, after you’ve finished bouncing tracks, the BR-864 then automatically switches to an empty V-track in order to set up a recording-destination track other than the one to which sounds have been bounced.

(11) Mastering

After bouncing and getting the performance data down to two tracks, apply the “Mastering Tool Kit” to obtain a master with optimized levels.

fig.00-448a

1

2,4

3,5

2,4

8 7 6

1.Press [REC MODE] repeatedly until “MASTERING” is

indicated for REC MODE at the left of the screen.

fig.00-448d

■: V-Tracks with recorded data.

❐: V-Tracks without data.

“What are V-Tracks?” (p. 14)

2.Press cursor [ ] [ ] and turn the TIME/VALUE dial to select the source tracks and V-Tracks from which

you want to record.

3.Press [ENTER].

Quick Start

fig.00-449d

43